電解メッキによる金属微細針の作製と電解エッチングによる先鋭化

DOI Web Site Web Site 被引用文献9件 参考文献25件

書誌事項

タイトル別名
  • Fabrication of Metallic Microneedle by Electroplating and Sharpening of it by Electrochemical Etching
  • デンカイ メッキ ニ ヨル キンゾク ビサイシン ノ サクセイ ト デンカイ エッチング ニ ヨル センエイカ

この論文をさがす

説明

Aiming at the use in low-invasive medical treatments, this paper reports a fabrication of metallic microneedle, which has a three-dimensionally sharp tip. Compared to a silicon or polymer needle which we previously proposed, a metallic needle has toughness to evade breakage. Even if it is broken, it does not become small pieces thanks to its ductility, which increases the safety for a human body. A nickel needle was fabricated using electroplating, followed by sharpening it by electrochemical etching. A smooth tip surface is obtained due to electrochemical etching reactions. Sharpness and smoothness of the tip are effective for easy insertion in the viewpoint of large stress concentration and small friction, respectively. An experiment of inserting the fabricated needle into an artificial skin of silicone rubber was carried out. The resistance force during insertion was much reduced compared to that of commercial stainless needle (23 G: shank diameter 650 µm). Although a fabricated metallic needle was inserted and pulled-out for several times, it was not broken in any trial. By changing the angle between object surface and needle axis, the insertion experiments were carried out. Fabricated nickel needle was not broken for any angle, while silicon needle was broken in case the angle is small, i.e., the needle is much inclined from normal direction of the surface, which ensures the safety of metallic microneedle to human body in the viewpoint of breakage.

収録刊行物

被引用文献 (9)*注記

もっと見る

参考文献 (25)*注記

もっと見る

関連プロジェクト

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ