押出発泡における発泡剤溶解現象に関する研究
書誌事項
- タイトル別名
-
- A Study of the Solubility of Blowing Agents in Foam Extrusion Systems
この論文をさがす
説明
The solubility of fluorocarbon blowing agents in foam extrusion of thermoplastic resin was investigated by both experimental and theoretical approaches. The thermoplastic resin used was polystyrene, while CFC-12 and HFC-134 a were the selected fluorocarbon blowing agents.<br>First of all, in our experimental approach, we developed a direct observation system using a fiberscope, and observed the shape and behavior of gas bubble in the extrusion system. In this experiment, we used CFC-12 as the blowing agent. It was noted that (1) the phenomena called gas dispersion in this field is the same as gas solubility in the resin, (2) huge voids generated in the plastic foam was mainly caused by poor solubility of the blowing agent. We considered the effects of pressure, temperature, and residence time in additional experiments.<br>Next, we constructed a quantitative theoretical model by applying the concept of absorption velocity that is defined for gas-liquid equilibrium for this phenomena. In a numerical simulation based on this model, the results showed good agreement with experimental results.<br>Finally experimental production parameters (pressure, temperature and residence time) were caluclated for HFC-134 a and polystyrene.
収録刊行物
-
- 成形加工
-
成形加工 3 (6), 425-430, 1991
一般社団法人 プラスチック成形加工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679438491392
-
- NII論文ID
- 130003691376
-
- ISSN
- 18837417
- 09154027
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可