エタノール/液体酸素ロケットエンジン燃焼室における 平面ピントル型噴射器の噴霧燃焼構造の光学計測

DOI Web Site Web Site 参考文献10件

書誌事項

タイトル別名
  • Optical Measurements of Spray Combustion Structure in an Ethanol/Liquid Oxygen Rocket Engine Combustor with a Planar Pintle Injector
  • エタノール/エキタイ サンソ ロケットエンジン ネンショウシツ ニ オケル ヘイメン ピントルガタ フンシャキ ノ フンム ネンショウ コウゾウ ノ コウガク ケイソク

この論文をさがす

説明

The pintle injector is one of the most promising candidate for propellant injection systems of liquid rocket engine combustors due to the throttling capability and simple structure. However, combustion characteristics of pintle injectors are still unclear. Therefore, combustion experiments are conducted for an ethanol/liquid oxygen rocket engine combustor with a planar pintle injector which simulates the injection configuration of a pintle injector and enables optical measurements at Pc=0.40MPa and O/F=1.08-1.56. Direct images of the flame structure and CH chemiluminesence are observed through an optical window using high speed imaging techniques. Backlit images of the spray structure are observed. Strong CH chemiluminescence is observed in the vicinity of the impinging point of the two propellants. Luminous flames are observed in the vicinity of the faceplate and the upper wall of the combustor. It is observed that atomization process of the planar pintle injector proceeds two-dimensionally unlike conventional impinging injectors. A periodic atomization behavior is observed with the frequency of approximately 700Hz, being equal to the frequency of the Kelvin-Helmholtz instability.

収録刊行物

参考文献 (10)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ