短繊維強化プラスチックの破壊モードに及ぼす材料微視構造の影響

書誌事項

タイトル別名
  • Effect of the Microstructure on the Fracture Mode of Short-Fiber Reinforced Plastic Composites
  • タンセンイ キョウカ プラスチック ノ ハカイ モード ニ オヨボス ザイリョウ ビシ コウゾウ ノ エイキョウ

この論文をさがす

抄録

A numerical simulation was presented to discuss the microscopic damage and its influence on the strength and energy-absorbing capability of short-fiber reinforced plastic composites. The dominant damage includes matrix cracking and/or interfacial debonding, when the fibers are shorter than the critical length for fiber breakage. The simulation addressed the matrix cracking with a continuum damage mechanics model and the interfacial debonding with an embedded process zone (EPZ) model. The fictitious free-edge effects on the fracture modes were successfully eliminated with the periodiccell simulation. The advantage of our simulation was pointed out by demonstrating that the simulation with edge effects significantly overestimates the dissipative energy of the composites. We then investigated the effect of the material microstructure on the fracture modes in the composites. The simulated results clarified that the inter-fiber distance affects the breaking strain of the composites and the fiber orientation angle affects the positions of the damage initiation. These factors influence the strength and energy-absorbing capability of short fiber-reinforced composites.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (28)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ