Verification of Anti-Loosening Performance of Super Slit Nut bv Finite Element Method

IZUMI Satoshi, YOKOYAMA Takashi, TERAOKA Takuya, IWASAKI Atsushi, SAKAI Shinsuke, SAITO Kinjiro, NAGAWA Masato, NODA Hideki

doi:10.1299/kikaia.71.380

Bibliographic Information

Other Title

ゆるみ止め性能を有するスーパースリットナットの有限要素法による機能検証
ユルミドメセイノウオユウスルスーパースリットナットノユウゲンヨウソホウニヨルキノウケンショウ

Search this article

Description

We have developed a new nut named 'super slit nut (SSN) '. which realizes anti loosening performance without complicated tightening procedures. In this study. tightening behavior and loosening behavior caused by shear load are analyzed by mean of three dimensional finite element method. It is found that SSN has a prevailing torque of 15 to 19 Nm. which closely agrees with experimental data. The load distribution of thread depends on the rotation angle of nut. At the angle of 24.6 degree, the distribution of 1st pitch turns to be 10% larger than that of conventional nut, reflecting the decrease in the thread at slit region. It is also found that the and loosening performance cas he realized by the thread contact force at the slit region. Since its contact force does not depend on the tightening force, the effect of and loosening performance drastically increases as the tightening force is decreased. Shear fracture would initiate not at slit region but at the bottom of 1st thread, whose stress is about 10% larger, as compared with conventional nut. Moreover, by mean of tensile and fatigue experiments, it is concluded that SSN involves sufficient strength in practical use.

Journal

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 71 (703), 380-386, 2005

The Japan Society of Mechanical Engineers

Keywords

Details 詳細情報について

Export