ＣＦＭ層２次元コールドモデルにおける粒子流動特性に及ぼす粒子みかけ密度の影響

DOI Web Site Web Site

書誌事項

タイトル別名
  • Effect of apparent particle density on particle flow behavior in two-dimensional cold model of CFM-bed.
  • CFMソウ 2ジゲン コールド モデル ニ オケル リュウシ リュウドウ トク

この論文をさがす

抄録

Fundamental flow behavior of a solid particle in a CFM-bed, such as minimum fast fluidization velocity, particle holdup, particle velocity distribution, and residence time, were observed in a two-dimensional visualized cold model by use of three kinds of solid particle : alumina balls, activated alumina balls, and coal particles.<BR>The minimum fast fluidization velocity, defined as the critical gas velocity to form a stable state of a fast fluidized bed or an entrained bed in the inner pipe, almost corresponded to the terminal velocity of a single particle. When a solid particle with a high apparent density was employed, however, a slight increase of the minimum fast fluidization velocity was recognized with an increase in the height of the inner pipe. Particle holdup and particle residence time showed similar trends to those of the glass beads in the previous study, exponentially decreasing with an increase in superficial gas velocity in the inner pipe. The velocity distribution of the solid particle was slightly affected in the inner pipe by the apparent density of the particle, but was nearly in the free falling flow region in the annular part.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ