固気流動層内での物体浮沈に及ぼす層底部の空気流入状態の影響

書誌事項

タイトル別名
  • Influence of Airflow at the Bottom of a Gas-Solid Fluidized Bed on Float and Sink of Objects
  • コキリュウドウソウ ナイ デ ノ ブッタイ フチン ニ オヨボス ソウ テイブ ノ クウキ リュウニュウ ジョウタイ ノ エイキョウ

この論文をさがす

抄録

In this study, float-sink of chlorine containing and not-containing plastics in a gas-solid fluidized bed of silica sand was studied with and without joints in the air distributor and by changing the amount of objects loaded on the air distributor. The float-sink was evaluated using three parameters, i.e., recovery, purity and efficiency. The values obtained with the joints are smaller than without the joints, and decreased with increasing the amount of objects on the distributor. Because there is no airflow at the joints, the sand on the joints is not fluidized and circulating flow of the sand is generated over the area other than the joints. A 2D fluidized bed showed that air bubbles are not uniformly generated on the air distributor and the fluidization of the sand becomes intense when the objects are on the distributor. These results indicate that the circulating flow and the sudden intense fluidization disturb the expected float-sink of objects.

収録刊行物

  • 粉体工学会誌

    粉体工学会誌 46 (3), 206-211, 2009

    一般社団法人 粉体工学会

被引用文献 (1)*注記

もっと見る

参考文献 (14)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ