ハニカム流路内の流れ挙動が気流中の粒子の壁面付着特性に及ぼす影響

  • 丹野 賢二
    一般財団法人 電力中央研究所 エネルギー技術研究所
  • 黒瀬 良一
    京都大学大学院 工学研究科 機械理工学専攻
  • 道岡 武信
    一般財団法人 電力中央研究所 環境科学研究所
  • 牧野 尚夫
    一般財団法人 電力中央研究所 エネルギー技術研究所
  • 小森 悟
    京都大学大学院 工学研究科 機械理工学専攻

書誌事項

タイトル別名
  • Effect of Flow Behavior in Honeycomb Channel on Characteristics of Particle Adhesion to the Wall
  • ハニカム リュウロ ナイ ノ ナガレ キョドウ ガ キリュウ チュウ ノ リュウシ ノ ヘキメン フチャク トクセイ ニ オヨボス エイキョウ

この論文をさがす

抄録

In a coal-fired thermal power plant, ash particles laden in flue gas adhere on de-NOx catalyst surface, and ash coverage causes the degradation of de-NOx catalyst. Therefore, in this study, effect of the flow in a honeycomb rectangular channel, which represents a single channel of de-NOx catalyst, on the adhesion characteristics of particles to the wall was investigated by applying a direct numerical simulation (DNS). Results show that the adhesion of particles is strongly affected by the flow. The particle adhesion is enhanced by turbulence near the inlet of channel, whereas suppressed due to the attenuation of turbulence in the downstream region. The particle adhesion also depends on particle diameter. Small particles adhere on the wall only in the upstream region, whereas large particles adhere all the way down to outlet, nevertheless flow transients to laminar. This is due to the fact that large particles keep the inertial force even in the downstream region. Moreover, the cross sectional position of particle adhesion also depends on both flow stagnation near the corner and a secondary flow which is driven on the plane normal to the streamwise direction.

収録刊行物

  • 粉体工学会誌

    粉体工学会誌 49 (10), 738-744, 2012

    一般社団法人 粉体工学会

被引用文献 (2)*注記

もっと見る

参考文献 (14)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ