Comparison of Measurement Precision with CMOS and CCD Cameras : Influence on Industrial Vision Metrology
-
- HATTORI Susumu
- Faculty of Engineering, Fukuyama University
-
- OHNISHI Yoshiyuki
- Vision Metrology Laboratory co. ltd
Bibliographic Information
- Other Title
-
- CMOSカメラとCCDカメラでの座標計測精度の比較 : 工業写真計測への影響(ライフログ活用技術,オフィス情報システム,マルチメディアシステム,マルチメディア通信,IP放送/映像伝送,一般)
- CMOSカメラとCCDカメラでの座標計測精度の比較--工業写真計測への影響
- CMOS カメラ ト CCD カメラ デ ノ ザヒョウ ケイソク セイド ノ ヒカク コウギョウ シャシン ケイソク エ ノ エイキョウ
Search this article
Abstract
In industrial vision metrology, off-the shelf cameras with known or unknown interior orientation parameters are widely employed. CCD which has long been used as an imaging sensor is now gradually replaced by CMOS. But the authors have often experienced the deterioration of measurement with a CMOS camera, the reason of which is unclear. This paper discusses experiments on precision comparison between the two types of cameras with almost the same conditions. The results show that the measurement precision with a CMOS camera is lower than that with a CCD camera by 5-10% in RMS object space coordinates. This paper discusses the experiment and analysis from viewpoint of respective factors.
Journal
-
- ITE Technical Report
-
ITE Technical Report 33.37 (0), 1-5, 2009
The Institute of Image Information and Television Engineers
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390282679504249344
-
- NII Article ID
- 10026067413
- 110007387298
- 110007483692
- 110007386812
-
- NII Book ID
- AA1123312X
-
- ISSN
- 09135685
- 24241970
- 13426893
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- CiNii Articles
-
- Abstract License Flag
- Disallowed