書誌事項
- タイトル別名
-
- The Influence of Tip Clearance on Performance and Internal Flow Condition of Low Viscous Fluid Food Centrifugal Pump
- テイネンド リュウタイ ショクヒンヨウ エンシン ポンプ ノ チップクリアランス ガ セイノウ ト ナイブ ナガレ ニ オヨボス エイキョウ
この論文をさがす
抄録
Fluid machineries for fluid food have been used in wide variety of field i.e. transportation, the filling, and improvement of the quality of fluid food. Although, flow conditions of it are quite complicated because fluid food is different from water. Therefore, the design method based on the internal flow conditions is not conducted. In this research, turbo-pump having small number of blade number was used to decrease shear loss and keep wide flow passage. The influence of the tip clearance was investigated by the numerical analysis using the model with and without the tip clearance. In this paper, the influence of the tip clearance on performances and internal flow conditions of turbo-pump using low viscous fluid were clarified by experimental and numerical analysis results. In addition, the design method based on the internal flow was considered. Further, the influences of viscosity on the performance characteristic and internal flow were investigated.
収録刊行物
-
- ターボ機械
-
ターボ機械 40 (10), 577-583, 2012
一般社団法人 ターボ機械協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679521694848
-
- NII論文ID
- 10031003076
-
- NII書誌ID
- AN00004836
-
- ISSN
- 18802338
- 03858839
-
- NDL書誌ID
- 024017671
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可