Inducer Design to Avoid Cavitation Instabilities

DOI Web Site 1 Citations 9 References

Bibliographic Information

Other Title
  • キャビテーション不安定現象を抑制するインデューサインペラ形状に関する研究
  • キャビテーション フアンテイ ゲンショウ オ ヨクセイ スル インデューサインペラ ケイジョウ ニ カンスル ケンキュウ

Search this article

Description

Three inducers were designed to avoid cavitation instabilities. This was accomplished by avoiding the interaction of tip cavity with the leading edge of the next blade. The first one was designed with extremely larger leading edge sweep, the second and third ones were designed with smaller incidence angle by reducing the inlet blade angle or increasing the design flow rate, respectively. The inducer with larger design flow rate has larger outlet blade angle to obtain sufficient pressure rise. The inducer with larger sweep could suppress the cavitation instabilities in higher flow rates more than 95% of design flow rate, owing to weaker tip leakage vortex cavity with stronger disturbance by backflow vortices. The inducer with larger outlet blade angle could avoid the cavitation instabilities at higher flow rates owing to the extension of the tip cavity along the suction surface of the blade. The inducer with smaller inlet blade angle could avoid the cavitation instabilities at the flow rates larger than the design flow coefficient, owing to the occurrence of the cavity first in the blade passage and its development upstream. The cavity shape and suction performance were reasonably simulated by three dimensional CFD computations under the steady cavitating condition, except for the backflow vortex cavity. The difference in the growth of cavity for each inducer is explained from the difference of the pressure distribution on the suction side of the blades.

Journal

  • Turbomachinery

    Turbomachinery 37 (12), 749-762, 2009

    Turbomachinery Society of Japan

Citations (1)*help

See more

References(9)*help

See more

Related Projects

See more

Keywords

Details 詳細情報について

Report a problem

Back to top