Prediction of Agglomeration Weight for Emulsion Polymerization Conducted in an Agitated Vessel
-
- Takahashi Koji
- Department of Biochemical Engineering, Yamagata University
-
- Komatsuzaki Jun
- Department of Biochemical Engineering, Yamagata University
-
- Takahata Yasuyuki
- Department of Biochemical Engineering, Yamagata University
この論文をさがす
抄録
To estimate the agglomeration weight for emulsion polymerization conducted in an agitated vessel, a simple method of combining a preliminary experiment and a CFD analysis is proposed. To get the relation between agglomeration weight and shear rate, the emulsion polymerization of interest (we adopted the styrene polymerization) was conducted in a vessel consisting of two-axial cylinders, which provides almost constant shear rate throughout vessel. To predict the shear rate experienced by a liquid or polymer, the trajectories of particles were obtained by CFD for the actual agitator adopted for emulsion polymerization. Employing these results, the agglomeration rate in emulsion polymerization in the real agitator equipped with a Maxblend could be estimated. The estimated result of agglomeration weight for emulsion polymerization shows good agreement with the experimental result conducted in the actual agitator.
収録刊行物
-
- JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
-
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN 48 (4), 253-256, 2015
公益社団法人 化学工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679545293696
-
- NII論文ID
- 130005065094
-
- NII書誌ID
- AA00709658
-
- ISSN
- 18811299
- 00219592
-
- NDL書誌ID
- 026602810
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可