書誌事項
- タイトル別名
-
- Improvement of Dielectric Barrier Discharge Plasma Reactor for Ozone Generation by Electrode Shape
- ユウデンタイ バリア ホウデン ホウシキ オゾナイザ ノ デンキョク ケイジョウ ニ ヨル コウコウリツカ
この論文をさがす
抄録
An effect of electrode shape on ozone generation in dielectric barrier discharge reactor is described in this article. Three different shape electrodes were employed as ground electrodes. A plane electrode is 6 cm in width, and 20 cm in length. A trench electrode has large number of knife-edge rails. A multipoint electrode has large number of four-sided pyramid projections on the plane. A high voltage plane electrode is covered with 0.5 mm thickness alumina layer worked as dielectric barrier. The experimental results show that the breakdown for the multipoint electrode occurs at 7.0 kVpp. This value is lower than 8.4 kVpp that is the breakdown voltage of the plane electrode. The ozone yield increases from 80 g/kWh to 130 g/kWh by changing the electrode shape from the plane to the multipoint. The ozone generation efficiency decreased with increase of the ozone concentration.
収録刊行物
-
- 電気学会論文誌. A
-
電気学会論文誌. A 125 (6), 501-507, 2005
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679571587072
-
- NII論文ID
- 10015676545
- 30011541355
-
- NII書誌ID
- AN10136312
-
- ISSN
- 13475533
- 03854205
-
- NDL書誌ID
- 7384295
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可