背後電極を有する絶縁物に存在する微小間隙を貫く交流絶縁破壊

DOI Web Site Web Site 被引用文献1件 参考文献7件

書誌事項

タイトル別名
  • AC Breakdown through a Narrow Crack in an Insulator with a Backside Electrode
  • ハイゴ デンキョク オ ユウスル ゼツエンブツ ニ ソンザイ スル ビショウ カンゲキ オ ツラヌク コウリュウ ゼツエン ハカイ

この論文をさがす

抄録

Influence of a crack in an insulator with a backside electrode upon AC breakdown voltage (BDV) was investigated in air. In the test insulator, the crack runs parallel with the plane backside electrode. The breakdown path from the HV electrode propagates through the crack to the counter electrode. The experimental results show that BDV depends upon the width of the crack in the area of the electrode distances longer than 50mm. In this area of the electrode distances, BDV decreases with a decrease in the width of the creak when the width is smaller than 500μm. For example, in the electrode distance of 120mm, BDV at 200μm of the crack width is about 0.85 times lower than that at 600μm of the width. The decrease in BDV for the width _??_500μm may result from the propagation of a positive surface leader. The positive leader propagates to the counter electrode before the breakdown only in the range of the width _??_500μm. The appearance of the positive leader may be due to the electric field enhancement by charge accumulated on the insulator surface in the crack. In the width _??_500μm, on the other hand, BDVs are almost independent of the width. The positive leader does not appear, but the negative leader appears significantly in the range of the width _??_500μm. It was observed in the range of the width _??_500μm that the propagation of the positive leader is longer than that of the negative leader. The decrease in BDV for the range of the width _??_500μm may result from the longer propagation of the positive leader through the crack.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (7)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ