書誌事項
- タイトル別名
-
- Examinations on Impregnating Epoxy Resins Used for Superconducting Coils
- チョウデンドウ コイル ガンシンヨウ エポキシ ジュシ ニ カンスル ケントウ
この論文をさがす
説明
In order to find out the most appropriate impregnating epoxy resin for superconducting coils, three types of epoxy resin were examined from various points of view. Those epoxy resins were amine curing type A, anhydride curing type B with tertiary amine accelerator and anhydride curing type C without accelerator.<br>From the examinations, resin A was found to be more superior in thermal shock resistance against cryogenic temperature than resins B and C because of its high tensile strength at cryogenic temperature and its small cure shrinkage. However, the test coil impregnated with resin A experienced more repeated premature quenches than the coil impregnated with resin C. This result might be explained by the crackings which started from microscopic defects, and which occured gradually in resin A compared with resins B and C. Moreover, the viscosity of resin A increased more rapidly during the impregnating process than that of resins B and C, so that resins B and C appear to be more appropriate for large superconducting coils than resin A.
収録刊行物
-
- 電気学会論文誌B(電力・エネルギー部門誌)
-
電気学会論文誌B(電力・エネルギー部門誌) 111 (9), 986-992, 1991
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679581348224
-
- NII論文ID
- 130006841124
-
- NII書誌ID
- AN10136334
-
- ISSN
- 13488147
- 03854213
-
- NDL書誌ID
- 3730199
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可