書誌事項
- タイトル別名
-
- 3D Modeling by Integrating Point Cloud and 2D Images through 3D Edge-Matching and Its Application to Architecture Modeling
- サンジゲン エッジ ニ モトズク テングン ト ガゾウ ノ ユウゴウ ショリ ニ ヨル サンジゲン モデリング ト ソノ ケンチクブツ エ ノ オウヨウ
この論文をさがす
抄録
The authors have developed a technology to produce a 3D surface model by detecting the 3D edges on the stereo-images of a digital camera. Then we arrived to register the 3D data obtained from the stereo-images and the 3D edge data detected on the 3D point-cloud of a Terrestrial Laser Scanner (TLS), and thus succeeded to develop the new technology to fuse the 3D data of the Camera and TLS. The basic idea is to take stereo-pictures by a digital camera around the areas where the scanner cannot, because of the occlusion. The camera, with the digital photogrammetry, can acquire the data of complicates and hidden areas instantly, thus shutting out the possibility of noises in a blink. The data of the camera are then integrated into the data of scanner to produce automatically the model of great perfection. In this paper, the authors show (1) how to detect the 3D edges on the photo images and to detect from the scanner's point cloud, (2) how to register the data of both 3D edges to produce the unified model, (3) how to assess the accuracy and the speed of analyzing process, which turned out to be quite satisfactory.
収録刊行物
-
- 電気学会論文誌Ｃ（電子・情報・システム部門誌）
-
電気学会論文誌Ｃ（電子・情報・システム部門誌） 133 (6), 1160-1172, 2013
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679586324224
-
- NII論文ID
- 10031175299
-
- NII書誌ID
- AN10065950
-
- ISSN
- 13488155
- 03854221
-
- NDL書誌ID
- 024699688
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
