ねじられた純銅試験片の静的および疲労強度について

書誌事項

タイトル別名
  • Static and Fatigue Strength of Twisted Specimen of Copper
  • ネジラレタ ジュンドウ シケンヘン ノ セイテキ オヨビ ヒロウ キョウド ニ ツイテ

この論文をさがす

抄録

To make fine grain material by plastic working is one of the methods for improvement of material strength. In this study, from the viewpoint of basic plastic working, the variations of static ultimate tensile strength and fatigue strength after the application of plastic torsional deformation on pure copper were investigated. Tensile test, Vickers hardness test and Rotating bending fatigue test were performed. The hardness of the materials varied from surface layer to center section in cross sectional area. The tensile strength was improved after applying torsional deformation. However, the fatigue strength was not improved. This is strongly related to hardness distribution around the surface layer of the specimen. Thus, the plastic softening was occurred in surface layer when the very fine grain was created by torsional deformation.

収録刊行物

  • 圧力技術

    圧力技術 48 (5), 276-282, 2010

    一般社団法人 日本高圧力技術協会

参考文献 (9)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ