書誌事項
- タイトル別名
-
- Study on Application of Asbestos-Free Gasket to Flanges under High-Temperature and Oxidative Condition
- 高温・酸化性環境のフランジへの非石綿ガスケット適用の検討
- コウオン サンカセイ カンキョウ ノ フランジ エ ノ ヒイシワタ ガスケット テキヨウ ノ ケントウ
この論文をさがす
説明
To prepare for prohibition of asbestos products, a verification test was made to select asbestos free spiral wound gasket (SWG) for high-temperature and oxidative condition. Since cracked gas from naphtha cracker of ethylene production plant is over 600°C, asbestos filled SWG was formerly installed in the flanges for this facility. To select substituted gasket free from asbestos, the following gaskets were installed in flanges of actual naphtha cracker: (1) vermiculite filled SWG, (2) mica-graphite filled SWG which was recommended by a gasket manufacturer, (3) asbestos-graphite filled SWG for comparison. After three times of start-stop cycle of the plant operation in near one year, vermiculite filled SWG did not change in its appearance and showed better seal ability than other two gaskets. Mica-graphite SWG could not resist naphtha cracker environment because exfoliated graphite filler was disappeared with oxidative degradation within several months. Vermiculite filled SWG showed higher reliability than mica-graphite filled SWG in the verification test, hence this SWG is expected to have a 2-year durability that is required for the ethylene production plant.
収録刊行物
-
- 圧力技術
-
圧力技術 47 (3), 145-153, 2009
一般社団法人 日本高圧力技術協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679592353920
-
- NII論文ID
- 130004446840
- 10024827250
-
- NII書誌ID
- AN00011762
-
- ISSN
- 13479598
- 03870154
-
- NDL書誌ID
- 10335696
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可