書誌事項
- タイトル別名
-
- Evaluation of Creep Properties for Non-asbestos Compressed Fiber Sheet Gaskets at Elevated Temperature using 3-D Viscoelasticity Model
- 3ジゲンネンダンセイ モデル ニ ヨル ヒイシワタ ジョイントシートガスケット ノ コウオン クリープ トクセイ ノ ヒョウカ
この論文をさがす
抄録
A gasket in flange joint experiences the both creep and stress relaxation by used for the long term. Recently, the creep property of gaskets at a room temperature was evaluated by a viscoelasticity model in single axis. But many gaskets are used at an elevated temperature, so the clarification of their creep properties at the elevated temperatures is urgently needed. In order to measure the creep and stress relaxation properties of gaskets at the elevated temperature, the test device was manufactured in which four-inch flanges were used. This paper describes the evaluations of the creep properties of non-asbestos compressed fiber sheet gaskets using a 3-D viscoelasticity model under the elevated temperature. The 3-D viscoelasticity model that yields more accurate results compared to the viscoelasticity model, which uses the conventional single axis, was applied to the elevated temperature creep properties. Using the3-D viscoelasticity model, the gasket creep is divided into the viscoelasticity component that converges on a certain strain and the volume change component that increases with time. The gasket strain is evaluated using the 3-D viscoelasticity model taking account the gasket stress relaxation. It is shown that the gasket strain is divided into the pure creep component of the gasket and the volume change due to the weight loss and chemical factor.
収録刊行物
-
- 圧力技術
-
圧力技術 48 (2), 61-69, 2010
一般社団法人 日本高圧力技術協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679592715392
-
- NII論文ID
- 130004446854
- 10026799558
-
- NII書誌ID
- AN00011762
-
- ISSN
- 13479598
- 03870154
-
- NDL書誌ID
- 10664476
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可