Phase‐Field Navier‐Stokesモデルによる繊維間隙スケール樹脂流れにおける気液界面ダイナミクスの検討

DOI HANDLE Web Site 参考文献41件 オープンアクセス
  • 井上 康博
    京都大学大学院工学研究科機械理工学専攻
  • 松本 迪斉
    三菱電機株式会社先端技術総合研究所
  • 北條 正樹
    京都大学大学院工学研究科機械理工学専攻
  • 高田 尚樹
    独立行政法人産業技術総合研究所集積マイクロシステム研究センター
  • 安達 泰治
    京都大学大学院工学研究科機械理工学専攻
  • 石田 和希
    京都大学大学院工学研究科機械理工学専攻

書誌事項

タイトル別名
  • Simulation Study on Dynamics of Resin-Air Interface during Resin-Air Flows between Filaments Using Phase-Field Navier-Stokes Model
  • Phase-Field Navier-Stokesモデルによる繊維間隙スケール樹脂流れにおける気液界面ダイナミクスの検討
  • Phase Field Navier Stokes モデル ニ ヨル センイ カンゲキ スケール ジュシ ナガレ ニ オケル キエキ カイメン ダイナミクス ノ ケントウ

この論文をさがす

抄録

To investigate void formation during resin transfer molding (RTM) processes, we developed a numerical code of a multiphase fluid model that employs Navier-Stokes equation including the interfacial tension term and Cahn-Hilliard equation for capturing the resin-air interface. We performed preliminary numerical simulations of microscale resin-air flow around a regular-lattice array of four single filaments. From the analysis, we found that (1) Laplace pressure arisen from the finite curvature of the resin-air interface could drive a capillary-driven flow penetrating into the gap between the two filaments located in longitudinal direction; (2) there was another dual time scale even at the microscale on the determination of flow patters: one was caused by the main flow, and the other by capillary driven transverse flow; (3) voids could be formed when the time scale of the main flow was shorter than that of capillary flow; (4) two modes of void formations were revealed numerically: longitudinal gaps fully capped by the resin-air interface leading to the void formation under a high interfacial tension coefficient; and a small bubble left at the back-step of the filament under a relatively weak interfacial tension coefficient.

収録刊行物

参考文献 (41)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ