先進複合材料の曲げ試験法における３点，４点曲げ方式の問題点

DOI Web Site 被引用文献2件
  • 岩井 宏
    日本大学生産工学部機械工学科
  • 植村 益次
    日本大学生産工学部機械工学科
  • 林 徹
    川崎重工業航空宇宙事業本部航空宇宙技術本部技術部構造技術課

書誌事項

タイトル別名
  • Issues of 3-Point and 4-Point Modes in Flexural Testing Methods for Advanced Composite Materials.
  • センシン フクゴウ ザイリョウ ノ マゲ シケンホウ ニ オケル 3テン 4テ

この論文をさがす

説明

The flexural testing methods for advanced composite materials have not yet been authorized internationally. In the present paper, the effects of various factors such as loading mode, span length, specimen size, radius of loading nose and control mode of loading etc. on the static and fatigue flexural properties were discussed in the experiments under the 3-point, 4-point bendings and pure bending. The specimens were the unidirectional carbon-fiber-reinforced plastics and the failures took place beneath the loading noses due to stress concentration in both 3-point and 4-point bending methods and the finite element method analysis were performed in order to explain the experimental results. Accordingly, it was found that the pure bending testing method is the best and the 3-point and 4-point methods are not recommended. If the experi-ment in 3-point or 4-point bending is inevitably performed, a film should be inserted beneath a loading nose which gives the reasonable strength by alleviating the stress concentration.

収録刊行物

被引用文献 (2)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ