可動管質量流量計 (III)

DOI

書誌事項

タイトル別名
  • Movable Tube Mass Flowmeter (III)

抄録

Movable tube mass flowmeters with two constant volume flow apparatus were reported in previous papers. The flowmeter, here reported, needs only one constant volum flow apparatus, and is accordingly superior to the previous ones.<br> It is shown theoretically that the movable tube mass flowmeter with a single constant volume flow apparatus must satisfy the following conditions: <br>cosθA/SA=-cosθB/SB=cosθC/SC (1)<br> where SA, SB and SC are the crosse-sctional areas of the straight tubes A, B and C which serve for the inlet or outlet of the movable tube; θA, θB and θC are the angles between the outward direction of each axis of the three straight tubes and the direction of displacement of the movable tube. The fluid of constant volume flow rate flows through the tube C.<br> In case of the following set of values of θA, θB and θC, the construction of the mass flowmeter becomes particularly simple:<br> θA=θC=π, θB=0. (2)<br> As with the previous flowmeters, the measuring principle of the present flowmeter is independent of Bernoulli's theorem and the mass flow rates can be calculated theoretically without having to determine the discharge coefficient experimentally.<br> Experiments were carried out by using two kinds of trial flowmeter of the above mentioned construction and the experimental results agree fairly well with the theory.

収録刊行物

  • 応用物理

    応用物理 45 (12), 1141-1145, 1976

    公益社団法人 応用物理学会

詳細情報 詳細情報について

  • CRID
    1390282679605615744
  • NII論文ID
    130003590057
  • DOI
    10.11470/oubutsu1932.45.1141
  • COI
    1:CAS:528:DyaE2sXkvVKktLw%3D
  • ISSN
    21882290
    03698009
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ