-
- 大西 和夫
- 日本サーボ
書誌事項
- タイトル別名
-
- Cogging Torque Reduction in Permanent Magnet Brushless Motors
- エイキュウ ジシャク ブラシレス モータ ノ コギング トルク テイゲン
この論文をさがす
説明
This paper studies properties and reducing techniques of cogging torque in brushless motors with surface permanent magnets and winding slots. Desirable combination between stator slots and magnet poles, and relation between the slots and added notches are shown. in order to minimize cogging torque, from the standpoint that cogging is mainly generated by fluctuation of 6th and 12th harmonic components in airgap magnetic energy lost by the stator slot openings.<br>Next, the proposed techniques are verified in the combination of poles and slots at typical 12 slots motors by using FEM simulation of two-dimensional model, and it is shown that bevelling of stator pole-tips reduces the cogging torque, especially in the motor with 12 slots and 10 poles.<br>Last, 6 slots and 4 poles motors with the added notches is calculated on the same 2D-FEM and it is shown that type B delivers better result in airgap magnetic flux distribution with rising part of quasi-sinusoidal waveform.
収録刊行物
-
- 電気学会論文誌D(産業応用部門誌)
-
電気学会論文誌D(産業応用部門誌) 122 (4), 338-345, 2002
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679633565184
-
- NII論文ID
- 10007984295
- 10011820549
-
- NII書誌ID
- AN10012320
-
- ISSN
- 13488163
- 09136339
- http://id.crossref.org/issn/09136339
-
- NDL書誌ID
- 6123299
-
- データソース種別
-
- JaLC
- NDLサーチ
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可