書誌事項
- タイトル別名
-
- Mechanism for Supporting Rotor of Direct Drive Motor Built in A Lens Barrel for Zoomlens.
- ズーム レンズヨウ キョウトウ イッタイガタ ダイレクト ドライブ モータ ノ
この論文をさがす
抄録
Camcoders would be more compact, lighter and lower-cost, if driving motors are built in lens barrels. The motors built in lens barrels have been proposed in the previous paper. A stator(lens barrel) and a rotor(variator lens) function as a female screw and a male screw, respectively. To reduce the power consumption of this motor, armature windings ampere turns have to be reduced by reducing a friction torque between the female screw and male screw. An new unique mechanism for supporting a rotor of a direct drive motor built in a lens barrel, in which balls are inserted between a outer ring raceway and inner ring raceway, is proposed in this paper. Two type of rotor, (l) the cascaded rotor which has a magnet with the lens and the inner raceway in cascade, and (2) raceway-magnet rotor which has the lens fixed in a grooved magnet are invented. Evaluations for three type of rotors, cascaded, raceway-magnet and separate-screw in the previous paper are presented. Armature winding ampere turns of cascaded and raceway-magnet rotor are 33% and 28%, respectively, whrere ampere turns of separate-screw rotor is 100%.
収録刊行物
-
- 電気学会論文誌D(産業応用部門誌)
-
電気学会論文誌D(産業応用部門誌) 116 (7), 785-793, 1996
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679633567360
-
- NII論文ID
- 10001788784
-
- NII書誌ID
- AN10012320
-
- ISSN
- 13488163
- 09136339
- http://id.crossref.org/issn/09136339
-
- NDL書誌ID
- 3985931
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可