クラウンエーテル誘導体を担持した<sup>90</sup>Sr分析用吸着繊維の作製

  • 堀田 拓摩
    国立研究開発法人日本原子力研究開発機構原子力基礎工学研究センター
  • 浅井 志保
    国立研究開発法人日本原子力研究開発機構原子力基礎工学研究センター
  • 今田 未来
    国立研究開発法人日本原子力研究開発機構原子力科学研究所福島技術開発試験部
  • 半澤 有希子
    国立研究開発法人日本原子力研究開発機構原子力基礎工学研究センター
  • 斎藤 恭一
    千葉大学工学部共生応用化学科
  • 藤原 邦夫
    株式会社環境浄化研究所
  • 須郷 高信
    株式会社環境浄化研究所
  • 北辻 章浩
    国立研究開発法人日本原子力研究開発機構原子力基礎工学研究センター

書誌事項

タイトル別名
  • Preparation of Sr Adsorptive Fiber by Impregnating with Crown Ether Derivative for <sup>90</sup>Sr Measurement
  • クラウンエーテル誘導体を担持した⁹⁰Sr分析用吸着繊維の作製
  • クラウンエーテル ユウドウタイ オ タンジシタ ⁹ ⁰ Sr ブンセキヨウ キュウチャク センイ ノ サクセイ

この論文をさがす

説明

A Sr adsorption fiber was prepared for rapid analysis of 90Sr content in the fiber using radiation-induced emulsion graft polymerization and subsequent chemical modification. A polyethylene fiber with a diameter of 13 μm was first immersed in a methanol solution of an epoxy-group-containing vinyl monomer, glycidyl methacrylate (GMA), and polyoxyethylene sorbitol ester (Tween20) as a surfactant for the graft-polymerization of GMA. Octadecylamine was then bound to a polymer chain extending from the fiber surface, providing hydrophobicity to the polymer chain. Dicyclohexano-18-crown-6 (DCH18C6) was finaly impregnated onto the polymer chain via a hydrophobic interaction between the octadecyl moiety of the polymer chain and the cyclohexyl moiety of DCH18C6. The fiber surface structure, characterized by DCH18C6 molecules loosely entangled with polymer chains, allowed for the rapid adsorption of Sr ions at an adsorption rate of approximately 100-times higher than that of a commercially available Sr-selective resin (Sr Resin®).

収録刊行物

  • 分析化学

    分析化学 66 (3), 189-193, 2017

    公益社団法人 日本分析化学会

参考文献 (4)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ