強制対流中におかれた冷却平板上の着霜分布に関する解析

  • 近藤 智恵子
    日立アプライアンス株式会社 清水空調本部 技術開発部
  • 千秋 隆雄
    山口大学大学院技術経営研究科
  • 小山 繁
    九州大学大学院総合理工学研究所
  • 桑原 憲
    九州大学大学院総合理工学研究所
  • 小国 研作
    日立アプライアンス株式会社 清水空調本部 技術開発部

書誌事項

タイトル別名
  • Numerical Study on Frost Profile over the Cooling Plate under Forced Convection
  • キョウセイ タイリュウチュウ ニ オカレタ レイキャク ヘイバンジョウ ノ チャクソウ ブンプ ニ カンスル カイセキ

この論文をさがす

抄録

This paper deals the numerical analysis on mass transfer under forced convection cooling. The transients of frost profiles on a cooling plat in a narrow channel were calculated by use of the packaged software with built in some original subroutines. In this paper, the architecture of these subroutines and this benchmark tests were showed. The calculation results exhibit local mass transfer rates and clarified following things. On the leading edge of the cooling plate, the frost accumulation accelerates locally. For the prediction on the cooling plate temperature distribution, to take into account latent heat of sublimation is necessary. In addition, the comparison between calculation and experimental results shows below issues. Both frost distribution profiles overlap in upstream; on the contrary, they do not overlap in the downstream. This comparison result indicates that the super saturation or mist flow is not negligible in the downstream. In terms of total frost weight, both results are roughly agreed and this weight increases proportionally with a run time despite increasing of the heat resistance caused by frost layer.

収録刊行物

参考文献 (32)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ