Bead Shape Control Systems for Butt Joints of Aluminium Alloy.
-
- OKUI Nobuyuki
- Ishikawajima-Harima Heavy Industries Co., Ltd.
-
- TSUCHIYA Kazuyuki
- Ishikawajima-Harima Heavy Industries Co., Ltd.
-
- HIRATA Suemi
- Ishikawajima-Harima Heavy Industries Co., Ltd.
-
- KOHKETSU Masaichi
- Ishikawajima-Harima Heavy Industries Co., Ltd.
Bibliographic Information
- Other Title
-
- アルミニウム合金溶接ビード形状制御システムの開発
- アルミニウム ゴウキン ヨウセツ ビード ケイジョウ セイギョ システム ノ カイハツ
Search this article
Abstract
Weld bead shape control is necessary for adequate welded structure performance when used under repetitive load. Bead shape occasionally deviates even when using automatic welding equipment because of changes in welding conditions such as the shape of the weld groove. A system for measuring the bead shape and controlling welding conditions during welding is thus required. Such a system will further upgrade the weld quality and welding efficiency. The effect of the root gap, a weld groove shape factor, on welding conditions and the bead shape were studied to work out a suitable bead shape control algorithm for an automatic bead shape control system to be used aluminium alloy butt welding.
Journal
-
- QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
-
QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 18 (2), 302-310, 2000
JAPAN WELDING SOCIETY
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390282679699276544
-
- NII Article ID
- 130003934567
- 110003422013
-
- NII Book ID
- AN1005067X
-
- ISSN
- 24348252
- 02884771
-
- NDL BIB ID
- 5379237
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed