基材温度上昇に伴う基材表面状態変化と溶射粒子偏平挙動に対する影響

書誌事項

タイトル別名
  • Effect of Substrate Surface Condition on Flattening Behavior of Thermal Sprayed Ceramic Particles.
  • キザイ オンド ジョウショウ ニ トモナウ キザイ ヒョウメン ジョウタイ ヘンカ ト ヨウシャ リュウシ ヘンペイ キョドウ ニ タイスル エイキョウ
公開日
2002
DOI
  • 10.2207/qjjws.20.317
公開者
一般社団法人 溶接学会

この論文をさがす

説明

In order to make a thermal spray process highly controllable, it is essential to clarify the dominating factors of the process. Especially, the flattening behavior of the individual sprayed particle, which is the fundamental unit of the coating formation, has to be investigated precisely. In this research, the effect of substrate surface condition after preheating on the flattening behavior of the thermal sprayed particles was investigated. The surface roughness of the substrate before and after the pre-heating was measured by atomic force microscope (AFM), and the relation between the roughness and the splat morphology was investigated. The results obtained in this research are summarized as follows: <BR>(1) The surface roughness of each substrate material was increased by the preheating, and splashing seemed to be induced by the surface roughness.<BR> (2) The microstructure on the bottom surface of the splat changed from porous to dense with an increase of the substrate temperature. From this fact, it is indicated that the adsorbent on the substrate surface seems to affect the splashing.

収録刊行物

被引用文献 (5)*注記

もっと見る

参考文献 (12)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ