書誌事項
- タイトル別名
-
- Trial Manufacture of a Transducer for the Detection of the Displacement of a Test piece by the Oscillating Stylus
- シサク シンドウショクシンガタ ヘンイ ヘンカンキ ニ ツイテ
この論文をさがす
説明
The trial design and manufacture have been made for a transducer useful to measure the surface roughness. For this purpose a slender beam was set. This was soldered on a piano wire it the center of gravity as shown in Fig. 1., in order to give an oscillating motion to the stylus. The stylus was fixed on an end of the beam oscillating around the Piano wire with its natural circular frequency ω.<BR>When a test piece was put under the oscillating stylus and touched to it, the phase of the oscillation changed abruptly and led to the original phase by an amount of phase angle φ.Where φ was a function of the situation of the test piece. Then by measuring φ (Pulse Time Modulation) the situation of the test piece could be detected.
収録刊行物
-
- 精密機械
-
精密機械 23 (264), 51-54, 1957
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679708079232
-
- NII論文ID
- 130003959728
- 110001286596
-
- NII書誌ID
- AN00130014
-
- NDL書誌ID
- 9951437
-
- ISSN
- 03743543
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可