ダイヤモンド砥石による研削に関する研究(第1報)

DOI

書誌事項

タイトル別名
  • Studies on Diamond Wheel Grinding (Part 1)
  • Influences of the Diamond Concentration
  • ダイヤモンド・コンセントレーションの影響

説明

The authors have made investigations about diamond wheel grinding in which plunge cut method by plain cup diamond wheels of bronze bonded was adopted. In this paper the influences of the diamond concentration of the wheel on stock removal is discussed theoretically and experimentally. And surface roughness produced in the grinding tests is also described.<BR>Theoretical investigation shows the tendency that stock removal decreases with the increase of the diamond concentration of the wheel if assumed the wheel having the abrasive grains whose tip has spherical shape, and the similar tendency was recognized in the grinding tests to some extent.<BR>Characteristics of the stock removal-normal grinding force (or contact pressure between the wheel and work surface) for a diamond wheel was clarified.<BR>It is also known that surface roughness Hmax decreases with the increase of the diamond concentration of the wheel.

収録刊行物

  • 精密機械

    精密機械 26 (302), 149-154, 1960

    公益社団法人 精密工学会

詳細情報 詳細情報について

  • CRID
    1390282679708709632
  • NII論文ID
    130003959911
  • DOI
    10.2493/jjspe1933.26.149
  • ISSN
    03743543
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ