炭素鋼S55C,S45C,S35C,S25C,S15C(焼鈍状態)の旋削作業標準

DOI Web Site

書誌事項

タイトル別名
  • Machining Standard for Turning Annealed Plain Carbon Steel (S55C, S45C, S35C, S25C, S15C)
  • タンソ コウ S55C , S45C , S35C , S25C , S15C ショウドン ジョウタイ ノ センサクサギョウ ヒョウジュン

この論文をさがす

説明

This report is only the introduction of the project to establish the machining standards for various important metals specified by the Japanese Standard. The major items of the test are selection of carbide grade, tool shape, speeds, and feed for turning typical five grades of plain carbon steels, and close investigation of the tool life from the viewpoint of both flank wear and crater.<BR>According to the test result, crater wear is the most serious problem in turning the carbon steels. Therefore, every effort should be made to control crater wear in selecting the best carbide grade, tool shape, cutting conditions, etc.

収録刊行物

  • 精密機械

    精密機械 28 (329), 338-351, 1962

    公益社団法人 精密工学会

詳細情報 詳細情報について

問題の指摘

ページトップへ