表面おうとつの三次元評価のための一測定法

DOI Web Site

書誌事項

タイトル別名
  • A Measuring Method of Three-dimensional Surface Asperities for Evaluation of Their Characteristics
  • ヒョウメンオウ ト ツ ノ 3ジゲン ヒョウカ ノ タメ ノ イチソクテイホウ

この論文をさがす

説明

The three-dimensional measuring system was developed and its performance was tested as the first stage to evaluate the three-dimensional characteristics of surface asperities. The measuring device was designed and manufactured to obtain the discrete data of asperity heights sampled at nodes of matrix on a surface. The present system consists of the profilometer of tracer type, the precision table which moves perpendicular to tracing direction of stylus, and the controller which drives the devices automatically. Ground surface (σ=0.4μm) and lapped one (σ=1.1μm) were measured and shown by the perspective pictures and the contour maps. The three-dimensional characteristics of these surfaces can usefully be evaluated by using the present system.

収録刊行物

  • 精密機械

    精密機械 46 (2), 230-235, 1980

    公益社団法人 精密工学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ