多孔性物質のレプリカ法
書誌事項
- タイトル別名
-
- Replica Techniques for Some Porous Materials
説明
In order to prepare the replica of a surface of the material which is porous as well as very brittle, the specimen is usually embedded in some plastics and the replica must be taken in such state after an appropriate etching.<br>It has been investigated that the most suitable method to prepare the replica of a surface of carbon electrode and others. Various plastics were tested to embed the specimen. The etching method and the replica technique were also examined. It was found best to make replica by means of the method of three-stage replica, Methyl-cellulose-Ethylcellulose-Carbon, embedding the specimen in Methyl-methacrylate. Several surfaces cut out from a carbon rod in different directions were compared.<br>These techniques are also applicable for some porous materials as paper, wood and silk-fiber.
収録刊行物
-
- 電子顕微鏡
-
電子顕微鏡 8 (1), 68-71, 1959
公益社団法人 日本顕微鏡学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679710504192
-
- NII論文ID
- 130003643822
-
- ISSN
- 04170326
-
- データソース種別
-
- JaLC
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
