書誌事項
- タイトル別名
-
- On the Development of Expert System for Selecting the Optimum Cutting Conditions (1st Report)
- 最適切削条件選定用エキスパートシステムの開発に関する研究-1-システムの基本構成と工具摩耗評価用サブシステム
- サイテキ セッサク ジョウケン センテイヨウ エキスパート システム ノ カイ
- Fundamental Construction and Sub-system for Evaluating Tool Wears
- システムの基本構成と工具摩耗評価用サブシステム
この論文をさがす
抄録
This paper describes an expert system for selecting the optimium cutting conditions, which enables us to arrive at the conditions in a similar way to the practice in actual machine-shops. The way of thinking of expert tool engineers for obtaining the optimum cutting conditions was first examined through a questionary investigation. The system was then constructed so as to possess the same functions as those in their way of thinking. The most important functions of the system are the prediction and the resolution of machining troubles such as chatter vibration, excessive tool wear and rough surface finish. Two different approaches are taken depending upon the kind of the troubles, which are retrieving data method with aid of the evaluating functions and analytical method through the algorithm of the metal cutting theories. As an example of the latter method, a sub-system for evaluating tool wear is developed together with a filling up method of its data base. This system is also proved to work well by experiments.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 56 (7), 1274-1279, 1990
公益社団法人 精密工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679741206144
-
- NII論文ID
- 110001370383
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 3677583
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可