プラズマ粉末溶融法により作製した磁性砥粒を用いた磁気研磨

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Magnetic abrasive finishing using PPM magnetic abrasives.
  • プラズマ フンマツ ヨウユウホウ ニ ヨリ サクセイシタ ジセイ トリュウ オ

この論文をさがす

抄録

Most of mold manufacturing procedures have been automated by the introduction of NC machine tool and CAD/CAM system. But the surface finishing of the mold must be done by hand work of well-skilled workers. Though many attempts were tried in the past 10 years to eliminate this hand work, the automatic finishing of mold surface with 3D curvature has not been achieved yet. New magnetic abrasive finishing process is thought as one of the possible methods for the automation of 3D surface finishing. In order to improve the grindability of magnetic abrasive Fe-NbC was made by Plasma Powder Melting (PPM). Fe-NbC abrasive was experimentally checked and its excellent grindability was confirmed by finishing milled surface into mirror surface. This Fe-NbC abrasive may contribute to the automatic 3D finishing combined with CAD/CAM system.

収録刊行物

  • 精密工学会誌

    精密工学会誌 56 (5), 935-940, 1990

    公益社団法人 精密工学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ