マシニングセンタの温度分布測定による熱変位補正　第２報　ＮＣ制御装置のピッチ誤差補正機能等を利用した自動補正

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • A Method of Thermal Displacement Compensation for Machining Center by Temperatures Measured on the Machine. 2nd Report. Automatic Compensation Using an NC Controller Marketed.
  • マシニング センタ ノ オンド ブンプ ソクテイ ニ ヨル ネツ ヘンイ ホセ
  • Automatic Compensation Using an NC Controller Marketed
  • NC制御装置のピッチ誤差補正機能等を利用した自動補正

この論文をさがす

説明

An automatic method has been proposed to compensate the thermal displacement associated with the spindle running of a machining center. At the first, this method determines a mathematical model between the thermal displacements at the cutting point and the temperature changes at the major points on the machine. The mathematical model separates the thermal displacement predicted into the zero point offset and the pitch error component. An NC controller compensates automatically the thermal displacement predicted from the temperature changes on the machine using the functions of the zero point offset and the pitch error compensation. Experiments have been carried out to verify the effectiveness of the method and the results showed that the a good accuracy of a machine is maintained during long hours auto-running.

収録刊行物

  • 精密工学会誌

    精密工学会誌 57 (6), 1066-1071, 1991

    公益社団法人 精密工学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ