書誌事項
- タイトル別名
-
- Preparation of Ceramic Micro Parts by Grinding.
- ビショウ セラミックス ブヒン ノ ケンサク カコウ
この論文をさがす
説明
In this paper, the application of grinding to process ceramic micro parts has been discussed. A compact size NC grinding machine was developed using a spindle electrically driven up to 40000 rpm and stages move every 1 rim pitch. Electroplated grinding wheels of 1.5 and 10 mm in diameter are prepared with diamond abrasives of #120, #325 and #800. The specifications of a grinding wheel and the grinding conditions to minimize grinding force and surface roughness of workpieces have been examined. As a result. when the #800 grinding wheel of 5 mm in diameter has been used. 2 mm long micro poles of alumina, silicon nitride and zirconia. of which diameters are 60 μm. 150 μm and 25 μm respectively. and 2 mm long micro shoulder pole and quadrilateral pole of zirconia have been obtained.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 63 (6), 884-888, 1997
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679742532352
-
- NII論文ID
- 110001367854
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 4227415
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDLサーチ
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
