書誌事項
- タイトル別名
-
- Elliptical Vibration Cutting (4th Report). Development of Tool Vibration Control System and Its Application to Ultraprecision Cutting.
- ダエン シンドウ セッサク カコウホウ ダイ4ホウ コウグ シンドウ セイギョ システム ノ カイハツ ト チョウセイミツ セッサク エ ノ テキヨウ
- Development of Tool Vibration Control System and Its Application to Ultraprecision Cutting
- 工具振動制御システムの開発と超精密切削への適用
この論文をさがす
抄録
Anew tool vibration system is developed for the ultrasonic elliptical vibration cutting, and it is applied to ultraprecision cutting of hardened steel in the present research. A method and a device to remove crosstalks between the two directional vibrations are developed, so that the two directional vibrations can be controlled independently. Then, a controller is developed to keep the elliptical vibration to have a desired locus, where the amplitudes of the two directional vibrations, phase shift between them are kept to be desired values and the vibration frequency is locked to an average of their resonant frequencies. The developed vibration control system is applied to utraprecision diamond turning of hardened steel, and an ultraprecise steel mirror with a shape accuracy of about 0.1 μm is achieved.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 67 (11), 1871-1877, 2001
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679773221120
-
- NII論文ID
- 110001373067
- 10010556845
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
- http://id.crossref.org/issn/09120289
-
- NDL書誌ID
- 5968986
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可