書誌事項
- タイトル別名
-
- Electrolytic Grinding Process for Minimizing Affected Layer (1st Report)-Characteristics of Affected Layer and its Reduction Process by Spark-out Grinding without Electrolysis-
- デンカイ ケンサク カコウ ニ オケル カコウ ヘンシツソウ ノ テイゲンポウ ダイ1ホウ カコウ ヘンシツソウ ノ セイジョウ ト デンカイ テイシ スパークアウト ケンサク ニ ヨル ソノ テイゲン カテイ
- Characteristics of Affected Layer and its Reduction Process by Spark-out Grinding without Electrolysis
- 加工変質層の性状と電解停止スパークアウト研削によるその低減過程
この論文をさがす
抄録
The purpose of this study is to minimize affected layer generated by electrolytic grinding which results in deterioration of gloss or decrease of hardness on machined surface. In this paper, a reduction process of affected electrolytic ground layer by a spark-out grinding process without electrolysis, in which electrolytic effect stops just in the moment of stopping infeed of grinding wheel, is experimentally investigated by analyzing characteristics of electrolytic ground surface with a glossiness meter or an ultra micro hardness tester. Main conclusions obtained in this paper are as follows: (1) The depth of affected layer decreasing hardness is nearly 2.5 times as large as that deteriorating gloss, and both depths of affected layer increase with increasing electrolytic voltage. (2) In the case of higher electrolytic voltage, the stock removal in spark-out grinding process without electrolysis is less than the depth of affected layer decreasing hardness generated in steady electrolytic grinding process. So after finish of spark-out grinding, an affected layer decreasing hardness is remained on finished surface on which glossiness is recovered up to that of mechanical ground surface.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 69 (8), 1129-1134, 2003
公益社団法人 精密工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679773273472
-
- NII論文ID
- 110001373582
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 6666833
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可