A Study on End-milling of Hardened Steels. Comparison of SKD11 and SKD61.
-
- NAKAGAWA Heisaburo
- 滋賀県立大学工学部
-
- HIROGAKI Toshiki
- 滋賀県立大学工学部
-
- NISHIMURA Komatsugu
- 滋賀県立大学大学院
-
- KAKINO Yoshiaki
- 東京大学大学院工学研究科
-
- KITA Yoshihiro
- 大阪工業大学
-
- OHTSUKA Hirotoshi
- 大分県産業科学技術センター
Bibliographic Information
- Other Title
-
- 金型用焼入れ鋼のエンドミル加工に関する研究 SKD11とSKD61の比較
- カナガタヨウ ヤキイレ コウ ノ エンドミル カコウ ニ カンスル ケンキュウ SKD11 ト SKD61 ノ ヒカク
- Comparison of SKD11 and SKD61
- SKD11とSKD61の比較
Search this article
Abstract
This study deals with the characteristics of end-milling the hardened steels (SKD11 and SKD61: HRC53). The experiment under various cutting speeds was done in order to estimate the relationship between the cutting distance and the cutting speed. The cutting forces and the chip temperature were measured in the experiment. The hardness of the chip was also researched after cutting. The tooth form of the used tool and the cutting fluid were varied to estimate the deposition of the materials. Furthermore, the carbide including the chip was observed by AFM and the microscope. As a result, it is clear that the carbide included in SKD11 makes it difficult to end-mill comparing SKD11 and SKD61.
Journal
-
- Journal of the Japan Society for Precision Engineering
-
Journal of the Japan Society for Precision Engineering 67 (5), 834-838, 2001
The Japan Society for Precision Engineering
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390282679773678976
-
- NII Article ID
- 110001368225
- 10010556557
-
- NII Book ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
- http://id.crossref.org/issn/09120289
-
- NDL BIB ID
- 5759189
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed