A study of High Speed Machining of Soft Magnetic Material by Binder-less PcBN Tool
-
- SHINTANI Kazuhiro
- 金沢工業大学
-
- USHIRO Hiroyuki
- 中村留精密工業(株)
-
- TAKANAMI Yoshiki
- 住友電気工業焼結合金(株)
-
- IKEGAYA Akihiko
- 住友電気工業(株)
Bibliographic Information
- Other Title
-
- バインダレスcBN工具における軟磁性材料の高速加工に関する研究
- バインダレス cBN コウグ ニ オケル ナンジセイ ザイリョウ ノ コウソク カコウ ニ カンスル ケンキュウ
Search this article
Abstract
In this paper the effectiveness of the binder-less PcBN tool with a sharp edge in the high-speed machining of soft magnetic materials. By using the binder-less PcBN tool with high-temperature hardness and high bending strength, we studied the effect of rake angle and cutting speed on the surface machined under a high-speed cutting condition. We then found that the surface roughness was reduced at a rake angle of -5 degrees by the increase of the cutting speed. On the other hand, the flank face wearing rate at a cutting speed of 20m/s decreased to 1/2.5 of the rate at a low cutting speed. The tool flank face wearing rate in the high-speed machining of pure iron, a major component of the work-piece material, was extremely higher than the rate in the machining of soft magnetic materials. It was found that the resin component of the work-piece materials remaining on the flank face in a graphitized form prevented the reaction between the binder-less PcBN tool and the iron, the main component of the work-piece materials.
Journal
-
- Journal of the Japan Society for Precision Engineering
-
Journal of the Japan Society for Precision Engineering 76 (7), 809-813, 2010
The Japan Society for Precision Engineering
- Tweet
Details 詳細情報について
-
- CRID
- 1390282679774285568
-
- NII Article ID
- 130000421874
-
- NII Book ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL BIB ID
- 10768877
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- Abstract License Flag
- Disallowed