書誌事項
- タイトル別名
-
- Mechanism of the Surface Finish Generation in Ultraprecision Cutting of Al-Mg Alloy.
- Al Mg ゴウキン ノ チョウセイミツ セッサク カコウ ニ オケル シアゲ メン アラサ ノ ソウセイ ヨウイン ニ カンスル ケンキュウ
この論文をさがす
抄録
In ultraprecision cutting by which surface finish is nano-meter order, the problems which are not necessary to consider in ordinary cutting occur. One of these is the step at grain boundary on machined surface which is generated by the difference of elastic recovery of crystal grains after cutting edge passing because of mechanical characteristics of crystal grain affected by crystal direction. In this study, in order to make clear the mechanism of the surface finish generation in ultraprecision cutting of Al-Mg alloy, the relationship between clearance angle of tool and surface finish is analyzed quantitatively taking notice of step at grain boundary. As a result, it is confirmed that burnishing effect with clearance of cutting tool, which strengthen with a decrease of clearance angle, improves surface finish in ultraprecision cutting of Al-Mg alloy.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 68 (9), 1221-1225, 2002
公益社団法人 精密工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679774677632
-
- NII論文ID
- 10017997198
- 110001373829
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 6290878
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
