書誌事項
- タイトル別名
-
- Development of CAPP/CAM System for 5-axis Control Machining
- 5ジク セイギョ カコウヨウ CAPP CAM システム ノ カイハツ 3ジゲン ビショウ ブヒン カコウ エ ノ テキヨウ
- —Application to Machining 3-Dimensional Complicated Tiny Part—
- —3次元微小部品加工への適用—
この論文をさがす
説明
Complicated 3-D parts can be created by using the developed multi-axis control machining centers. 3-D CAD/CAM systems for multi-axis control machining are also developed to save time and labor in preparing NC data. However, operators consume a longtime in process planning since there are few practical computer systems for process planning. It is indispensable to develop CAPP(Computer Aided Process Planning) system for 3-D machining in response to the demands. The study deals with the development of fundamental CAPP/CAM system for multi-axis control 3-D machining. The system developped in the study enables 5-axis control tool path generation in consideration of tool length, the tool posture change and the workpiece fixing direction, based on the tool entrance face concept. From experimental result of creating a micro impeller, it is confirmed that the CAPP/CAM function has the potential of effective multi-axis control machining.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 76 (1), 90-95, 2010
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679774744192
-
- NII論文ID
- 130000302344
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 10550623
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可