ネッキング延伸を通してみたポリエステル繊維の延伸機構

書誌事項

タイトル別名
  • THE DRAWING MECHANISM OF POLYESTER FIBERS ON THE BASIS OF NECKING DRAWING METHOD
  • ネッキング エンシン オ トオシテ ミタ ポリエステル センイ ノ エンシン キコウ

この論文をさがす

抄録

In the previous paper1), the relationship between necking characteristic factors and neck angle which is a parameter expressing the characteristics of the necking geometry were discussed for undrawn polyester fibers.<br>The present paper intends to investigate the drawing mechanism of polyester fibers on the basis of the informations obtained in the previous paper.<br>1) The results obtained in the most ideal drawing system equipped with the hot-pin leads us to conclude that substantial conditions for occuring necking are hot-pin temperature and feed roll speed. The necking angle is affected decidedly by these factors, and the necking properties such as. draw ratio and necking tension, are determined only by the necking angle.<br>The necking draw ratio is not equal to the machine draw ratio defined as the speed ratio of two rollers. The relationship between the necking draw ratio and the machine draw ratio may be expressed by following equation:<br>Machine DR=Necking DR+2nd draw<br>2) The neck angle estimated from the model undrauring using WLF equation agrees well the experimental results.<br>3) The experimental relationship between the necking drawing and 2nd drawing is discussed for the model and industrial drawings.<br>4) The neck angle is closely related to the aging condition of the undrawn polyester fibers.<br>The increase of aging time enlarges the neck angle and the local variation.

収録刊行物

  • 繊維学会誌

    繊維学会誌 27 (6), 239-245, 1971

    社団法人 繊維学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ