-
- Kanehara Takao
- Micro System Technology Laboratory, OKI Electric Industry, Co., Ltd.
-
- Koiwa Ichiro
- Micro System Technology Laboratory, OKI Electric Industry, Co., Ltd.
-
- Mita Juro
- Micro System Technology Laboratory, OKI Electric Industry, Co., Ltd.
-
- Ono Sachiko
- Advanced Research Institute for Science and Engineering, Waseda University
-
- Osaka Tetsuya
- Faculty of Science and Engineering, Waseda University
書誌事項
- タイトル別名
-
- Effect of Preparation Condition on the Activation of the Screen-Printed MgO Protective Layer for AC-PDP.
- Effect of Preparation Condition on the
この論文をさがす
抄録
To understand the effect of the powder characteristics of screen-printed protective layers on activation, we studied several types of MgO powder using parameters, fabrication methods such as vapor phase oxidation (VPO) and decomposition of Mg (OH) 2 (DOM), the BET value (particle surface area), and the particle size of the MgO powder. First, powders were analyzed by using FTIR, DSC, and TEM. Results show that VPO powder has a lower activation energy compared to DOM powder because of its high crystallinity, smooth surface, and non aggregated particles. Panels were then fabricated using these powders, and activated. To evaluate activation, we measured the firing voltage as a function of activation temperature and aging time. Panels using VPO powder were activated most easily at temperatures above 300°C and firing voltage stabilized within 20 minutes.
収録刊行物
-
- テレビジョン学会誌
-
テレビジョン学会誌 50 (8), 1125-1131, 1996
一般社団法人 映像情報メディア学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680042081664
-
- NII論文ID
- 110003705525
-
- NII書誌ID
- AN00151466
-
- ISSN
- 18849652
- 03866831
-
- NDL書誌ID
- 4020133
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可