Using Amorphous Magnetic Powder to Estimate the Depths of Cracks in Concrete

DOI NDL Digital Collections Web Site 3 Citations 3 References
  • Yokouchi T.
    Dept. of Electrical Engineering, Tohoku Gakuin Univ.
  • Okuyama T.
    Dept. of Electrical Engineering, Tohoku Gakuin Univ.
  • Haga A.
    Dept. of Electrical Engineering, Tohoku Gakuin Univ.
  • Otsuka K.
    Dept. of Electrical Engineering, Tohoku Gakuin Univ.
  • Yagi M.
    Energy Electronics Lab., Kumamoto Institute of Technology
  • Matsuki H.
    Graduate School of Engineering, Tohoku Univ.

Bibliographic Information

Other Title
  • アモルファス磁性粉を用いたコンクリートクラックの深さ推定の基礎的検討
  • アモルファス ジセイフン オ モチイタ コンクリート クラック ノ フカサ ス

Search this article

Abstract

A new method is proposed for estimating the depth and inclination angle of a crack in concrete. Amorphous powders were packed into a crack and excited by means of an alternating magnetic field. The exciting field was created by an E-form ferrite core with a pick-up coil centered between the two exciting coils.<br> The pick-up coil measured the magnitude and phase of the magnetic flux caused by the crack packed with amorphous powders. To model the crack, acrylic pipes of various lengths were prepared and packed with amorphous powders. The experimental results show that the inclination angle were clearly recognized, and the length of the crack was determined to be 30 mm.

Journal

Citations (3)*help

See more

References(3)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top