溶融Zn‐Al‐Mg系合金めっき鋼板のAl‐Fe合金層成長に与えるめっき浴へのSi添加の影響

  • 本田 和彦
    新日本製鐵株式会社技術開発本部君津技術研究部
  • 潮田 浩作
    新日本製鐵株式会社技術開発本部
  • 山田 亘
    新日本製鐵株式会社技術開発本部先端技術研究所

書誌事項

タイトル別名
  • Influence of Si Addition to the Coating Bath on the Growth of Al-Fe Alloy Layers in Hot-dip Zn-Al-Mg Alloy-coated Steel Sheets
  • 溶解Zn-Al-Mg系合金めっき鋼板のAl-Fe合金層成長に与えるめっき浴へのSi添加の影響
  • ヨウカイ Zn Al Mgケイ ゴウキンメッキ コウハン ノ Al Fe ゴウキンソウ セイチョウ ニ アタエル メッキ ヨク エノ Si テンカ ノ エイキョウ

この論文をさがす

抄録

The influence of Si addition to the coating bath on the growth of Al–Fe alloy layers formed in the interface between the coating and the steel substrate was studied utilizing a Zn–Al–Mg coating bath with 10–11 mass% Al content. While the Al–Fe intermetallic compound rapidly grew in the interface between the coating and the steel substrate when dipped into a coating bath of Zn–10mass%Al–3mass%Mg at 550°C, the growth was extremely suppressed by the addition of 0.2 mass% Si to the coating bath. TEM observation revealed that, in the interface between the coating and the substrate the Si addition resulted in the uniform formation of very fine grains with a size of 20–30 nm in diameter of the Fe2Al5 phase with Si and Zn in a solid solution. The mechanism of the Si addition was postulated that the large amount of Fe in the substrate may be dissolved easily into the liquid phase in the case of a ternary Fe–Al–Zn system, whereas in the case of a quaternary Fe–Al–Zn–Si system, the dissolution of Fe into the liquid phase is significantly suppressed by the presence of very fine and thin Fe2Al5 containing Si in the interface between the coating and the substrate. Thus, the growth rate of Fe2Al5 was extremely reduced.

収録刊行物

  • 鉄と鋼

    鉄と鋼 97 (1), 19-25, 2011

    一般社団法人 日本鉄鋼協会

被引用文献 (2)*注記

もっと見る

参考文献 (10)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ