書誌事項
- タイトル別名
-
- Studies on Drilling of Plastics
- プラスチック ノ キリモミ ニ カンスル ケンキュウ
この論文をさがす
抄録
It is difficult to obtain accurate and smooth holes on plastics by drilling. The object of the present research is to examine the cutting phenomena in drilling of various plastics. The main results obtained are as follows : (1) The torque of drill increases linearly with the depth of hole, which shows that the forces on the margin are distributed uniformly along its length. (2) The margin exhibits both frictional and cutting resistances. The cutting action of the margin seems to be a characteristic phenomenon in drilling of plastics. (3) In order to avoid the chipping around the edge of the hole, it is effective to use the drill having the very short margins with the relief angle, and having the roundness at the outer corner of cutting edges.
収録刊行物
-
- 日本機械学會論文集
-
日本機械学會論文集 26 (169), 1233-1240, 1960
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680131989376
-
- NII論文ID
- 110002351256
- 110002458567
-
- NII書誌ID
- AN00187419
-
- ISSN
- 21859485
- 24242675
- 00290270
-
- NDL書誌ID
- 9150630
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可