書誌事項
- タイトル別名
-
- The Effect of the Thread Rolling Conditions on the Fatigue Strength of the Rolled Screw Threads : 2nd Report, Rotating Bending Fatigue Strength of the Specimens with Rolled V Groove
- テンゾウジョウケン ガ テンゾウネジ ノ ツカレ ツヨサ ニ オヨボス エイキョウ 2
この論文をさがす
抄録
In order to clarify the effect of rolling conditions on the fatigue strength of the rolled screw threads, the V grooves were rolled on the cylindrical specimens and the rotating bending fatigue tests were carried out on these specimens. For this purpose the simple rolling attachment was designed and manufactured. The rolling pressure in the case where the V grooves were rolled by this attachment, was measured. This rolling process was analysed, and compared with the process of thread rolling. In the experiment the rolling conditions of the V groove were changed by varying the number of revolutions of the specimen during rolling process. The specimen materials were medium carbon steel cold worked and Cr-Mo steel quenched and tempered. As a result it was found that the endurance limits of the specimens with the rolled V groove were 2.5∼2.8 times higher than those of the specimens with the cut V groove. Statistical analysis has shown that there exists a definite relationship between the rolling condition and the endurance limit.
収録刊行物
-
- 日本機械学會論文集
-
日本機械学會論文集 27 (184), 1921-1930, 1961
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680131999232
-
- NII論文ID
- 110002351554
-
- NII書誌ID
- AN00187419
-
- ISSN
- 21859485
- 00290270
-
- NDL書誌ID
- 9150894
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可