ビッカースかたさと圧子の対面角との関係について

DOI DOI Web Site Web Site Web Site

書誌事項

タイトル別名
  • On the Relation Between the Vickers Hardness Numbers and the Face Angles of Pyramidal Indenters
  • ビッカース カタサ ト アツコ ノ タイメンカク ト ノ カンケイ ニ ツイテ

この論文をさがす

抄録

Vickers hardness numbers of 45 test specimens have been measured by 4 pyramidal indenters with different magnitudes of face angles (angles between opposite faces of pyramids), in order to find the relation between Vickers hardness numbers Hv and magnitudes of the face angles θ. Then, this relation was formulated in a mathematical form, in which the mean pressure, i.e. Hv/sinθ/2 was represented by the experimental function of tanθ/2. This is the same as the result already, obtained by one of the authors in the measurement with pyramidal indenters of tungsten carbide. In the present experiment, it has been found that the value of the exponent for each speciment depends on its material ranging 0.15∼0.40 and is in a simple relation with the hardness of the test specimen. From this result, it can be expected that the maximum error of Vickers hardness number measured will not exceed 0.2∼0.5%, if pyramidal indenters of face angles of 136°±0.5° are used. The experimental formula for the mean pressure may also be expressed by the experimental function of cosθ/2 instead of tanθ/2, in which case the value of the exponent for each specimen depends on the work-hardning characteristics of its material.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ